How to record the position of the photo when it is taken.
1. Tap "Position".
2. Tap Select drawing and select the drawing you want to link the photo position to.
3. When you take a photo from Take photo after tapping the photo shooting position and making a pin, the shooting position is recorded as photo information.
If the floor number on the Blackboard is different from the floor number on the drawing, a message will appear. If there is no problem, please check the correct content and "set".
Point. After setting up the pin, you can change its position by tapping the pin again.
※ If the drawing has been set as the street center, the Position will be indicated on the construction site.
※Please refer to the "Set Ascending Core on the Drawing (PC)" for more information on setting of the street center.
How to check the position of the photo after taking the photo
1.From the photo list screen, set the photo shooting position and select the photo you took.
2.Tap the "i".
3.Scroll down to the bottom of the screen to see the set shooting position and the street on the X and Y axes*.
※ The street X and Y axes will be entered automatically when the shooting position is set on the drawing with the street center set.
※ For more information on setting up the center of rotation, please refer to Setting the Slide Center in the Drawing (PC).