Create an inspection item from the reinforcement list (PC)
Click on "Batch Creation" and then click on "Batch Creation from Scaffolding List".
Set the inspection items. You can enter "Category", "Person in charge", "Due date" and "Blackboard type" from the information. You can also create a checklist in advance. After entering the information, click "Next". Tips. The items are the same as in the tasks function. See the tasks in the drawing functions.
Upload the reinforcement list (PDF).
You can remove unwanted pages by clicking on Delete. After organizing the reinforcement list, click Next.
Set up a cutout line. Click "Add" and set the vertical and horizontal lines.
Move. To move the selected line, click "Move" and move the cursor to the target line . Deleted. To delete a cutout line, click "Delete", move the cursor over the line and click.
You can set up "Sign" and "Floor" in the reinforcement list. Click on the "Sign and floor setting" and enter the code and floor. The "Sign" and "Floor" you set here will be reflected in the "Construction Site" and "Measurement Point". (This may vary depending on the blackboard you are using.)
Select the image to be used from the list of reinforcement. Remove the check mark for unnecessary images.
If you need to add "Heading Column" and "Heading Row", please check the box. If you check the box, a green frame will surround the image. Here the image is cropped so that a sign and a floor are applied to each floor.
When you are done, click "Bulk Create".
Place the pins of the inspection item on the drawing.