Photoruction Help Center home page
  1. Photoruction
  2. Usage of the drawing function
  3. Setting of the street center

Articles in this section

  • Set the base line on the drawing (PC)
  • Copy the base line to the drawing (PC)
  • To set the angle of the base line (PC)
  • Set the symbol for the base line (PC)

To set the angle of the base line (PC)

  • February 19, 2021 06:19
  • Updated
  1. It is possible to set the angle of the base line.
    To_set_the_angle_of_the_base_line_PC_1_20210215.png
  2. You can change the angle of the base line by entering the "Angle" value.

    To_set_the_angle_of_the_base_line_PC_2_20210215.pngTo_set_the_angle_of_the_base_line_PC_3_20210215.png
Was this article helpful?
0 out of 0 found this helpful
  • 導入者様 問い合わせはこちら
  • 資料請求等はこちら
Return to top
  • Photoruction
  • 会社概要
  • サービス概要
日本語 简体中文